Skip to main content

Bulova 1976 Accutron Mini

7/10 votes
Model ID rating explained.
3

Manufacture Year: 

1976

Movement Model: 

2210

Movement Jewels: 

14

Movement Serial No.: 

-

Case Serial No.: 

F47224

Case shape: 

Cushion

Case Manufacturer: 

Bulova

Gender: 

Ladies

Additional Information

The face of the watch says ACCUTRON and has the accutron symbol. The case back says: BULOVA 10K GOLD FILLED then has a M6 below that then in the middle it says S W BELL LENNIE COCHRAN 30 YEARS 5-16-76. Then at the bottom of the case is F47224

Not For Sale
1975 Bulova watch
1975 Bulova watch
1975 Bulova watch
1975 Bulova watch
1975 Bulova watch
mybulova_admin
Club 5000Panel Member
Posted September 30, 2019 - 11:39am

Whilst I cannot find the axact advert match, I suspect your watch belongs to the 'Bulova Mini Accutron' line.

mybulova_admin
Club 5000Panel Member
Posted October 4, 2019 - 9:16am

If the case back has a 'M6' then it will be from 1966.

Geoff Baker
Club 5000Panel Member
Posted October 4, 2019 - 8:37pm

1966 Bulova Accutron Mini is a good ID

Kathy L.
Panel Member
Posted October 4, 2019 - 8:52pm

1966 Bulova Accutron Mini

Reverend Rob's picture
Reverend Rob
Panel Member
Posted October 5, 2019 - 9:33pm

I'm always amazed they were able to make them this small....

1966 Accutron Mini

Geoff Baker
Club 5000Panel Member
Posted October 6, 2019 - 6:00am

PS - 8000 wraps of copper wire in each coil, the wire is ONE FIFTH the diameter of a human hair!

Andersok's picture
Andersok
Panel Member
Posted October 6, 2019 - 6:07am

I'm fairly certain these were not made until the early 1970s, 1972 is the earliest Mini Accutron ad I can find, so 1966 is not possible. Could be N6 on the back?

Kathy L.
Panel Member
Posted October 6, 2019 - 9:20am

Yes I think you are right Ken.  When you zoom in on the back it does look like a N6 and the engraving has a 78 Date.

amandldavis@gmail.com's picture
amandldavis@gma...
Posted October 6, 2019 - 10:36am

The case back does have an n6 and the engraved date is 76

Kathy L.
Panel Member
Posted October 6, 2019 - 4:52pm

Great!  Thanks for confirming.