I picked up this 1977 diver recently. It has a 1133.10 movement that was missing parts but is running now and I just need a bezel. It appears this came with the Pepsi bezel with the red to 15 seconds. I picked up a NOS bezel on Ebay. It is part #BT/857W 1-Turning bezel Group 6. This one is a Pepsi also but to 20 seconds. It came with the spring and bezel insert for $60 and I had a $25 coupon so I jumped on it. I figure if I cant use it someone else here might. That being said anyone know the part number for this watch bezel and the watch for NOS bezel that I picked up?
In reply to Hi Jim - what's the case… by Geoff Baker
In reply to Hi Jim - what's the case… by Geoff Baker
In reply to Looks like a match to me. Do… by mybulova_admin
Well I received the case and bezel today and low and behold it does not fit. They seller sent me the exact same case as me along with this dial. It is the correct diameter but the bezel channel is recessed and the bezel sits atop the case. Therefore the tension spring cannot reach down to the tension ring channel. It is as if there is a missing gasket that or part that would sit in the channel. Does anyone have one of these that can show me what the bezel should look like or how it attached to the watch. The bezel looks correct in all other ways. Thanks